Micro TP4056 Lithium Battery Charger W/ Current Protection


23 in stock

This charger is a very small battery charger module. It uses the TP4056 controller and standard configuration is with 1A charge current.




23 in stock

1. Ampere meter can only be connected to a 5v input end of the module.
2. It is better than the charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, a current of 400mAh is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-subtract the charging current to avoid burn damage to the chip.
6. NO Reverse polarity.

SKU: RM0141 Categories: ,
Weight 0.1 kg
Dimensions 5 × 4 × 2 cm

Module Name: rechargeable lithium battery plate
Method: linear charge 1%
Charging current: 1A Adjustable (Through RPROG)
Charge Accuracy: 1.5%
Input voltage: 4.5V-5.5V
Full charge voltage: 4.2V
Charging indicator: red green full charge
Charging input interface: mini USB
Working temperature: -10 Degree to +85 Degree
Polarity Reversal: NOT ALLOWED
Weight: 10g external
Dimensions: 25 * 19 * 10mm

Based on 0 reviews

0.0 overall

Be the first to review “Micro TP4056 Lithium Battery Charger W/ Current Protection”

There are no reviews yet.