Technical parameters –
Input voltage range: 6.00-40.00V.
Output voltage range: 0V-32.00V.
Output current: 0-3.000A.
Output power range: 0-96W.
Product Weight: about 90g.
Product Dimension: 79*43*41(mm) (L*W*H).
Open size: 71mm*39mm.
Output voltage resolution: 0.01V.
Output current resolution: 0.001A.
Output Voltage accuracy: ± (0.5% + 1 digits).
Output Current accuracy: ± (0.5% + 2 digit).
NOTE: You must make sure that the input voltage is 1.1 times higher than output voltage. Under large current circumstances, pay attention to heat elimination.
Connection description –
IN+: Input positive.
IN-: Input negative.
OUT+: Output positive.
OUT-: Output negative.
Note: Input voltage range is DC 6-40V and 40v is the limit voltage; please leave a room to use. Or else it will be burnt. The input must be DC power supply, not AC 220V, or else it will be burnt too. Though this module has reverse connection protection and output short circuit protection, you can muse be in strict accordance with connection description to connect. If you connect the supply power with output, the module will be burnt.
Panel description –
1-Voltage setting/Page up to choose/Shortcut extract M1 data group.
2-Data setting/ Extract value of the specified data group/Store value into the specified data group.
3-Current setting/Page Down to choose/Shortcut extract M2 data group.
4-1.44 inch color LCD screen.
5-Coding potentiometer/Data adjustment/Lock all buttons.
6-Open or close output.